logo

You are currently viewing: Literature

Back

FracSENS LB 6770 Density Meter

The FracSENS LB 6770 nuclear density meter can connect directly to the control system. Without the transmitter unit, the outputted count rate can be used in the control system to calculate PPA, PPG, or SGU in both low and high pressure applications.

The new scintillation technology ensures high sensitivity and allows drastic reduction of source activity compared to conventional ion chamber detectors. A maximum of 20 mCi has proven sufficinet for traditional fracturing applications.

With outer dimensions of 2.2 x 11.2 inches the FracSens LB 6770 is much smaller than any other fracturing density meter. Due to the compact design and its internal structure the density meter is extremely resistant to vibration and mechanical shock, which has been proven successfully in excessive tests (up to 500 g) and in real Applications.

Ready to use in minimal time Depending on customer preferences the FracSENS LB 6770 either connects to the control system directly or to the DuoXpert LB 475 Fracturing transmitter. In the first case customers will receive a signal proportional to count rate or density, which could either be a voltage output, a current output, or a pulse output — whatever fits customer control system. Even Modbus RTU communication is available. The FracSens LB 6770 is factory pre-configured according to customer needs and only a quick calibration with empty pipe and water or with water and a slurry of known density is needed to set the system up. When the FracSens 6770 is connected to the DuoXpert LB 475 transmitter, several other output alternatives like PPA, PPG, percent, solids, specific gravity, or density become available with the transmitter performing all calculations, providing a 4-20 mA output signal.

Easily retrofit existing systems
Source replacement is costly, time consuming, and does not work towards a reduction in overall site source activity. Fortunately, the FracSENS LB 6770 can be used in combination with existing sources and clamps. We also offer adapters and clamps to adapt to customer’s current system. Especially in low radiation conditions, our highly sensitive detectors improve the signal to noise ratio, providing superior measurement performance when compared to competing systems.

DOWNLOAD LITERATURE

Sponsor:

Categories:

View More

  • Density, concentration and solids content

    Non-contacting measurement technology made by Berthold. Berthold density measurement systems are used for the continuous process control on pipelines and in vessels. Density, concentration and solids content are determined in a non-contacting manner, without affecting the flow properties of the measured ...

  • Continuous level - Non-contacting measurement

    Non-contacting measurement technology by Berthold. The level measurement technology by Berthold is used in a variety of industrial sectors – ranging from the chemical to the waste water industry. It is suitable for measuring ranges of just a few millimetres up to several metres. Applications are ...

  • Interface and Multiphase Level Measurement

    Radiometric measurements from Berthold. The radiometric measurement systems from Berthold are used to localize the interface layer between two phases. These systems are even used in more complex processes to measure the density profile and thereby picturing the heights of the different product layers ...

  • Interface measurement in desalters

    Interface measurements in desalters are often regarded as not being very critical, even though every drop of oil, to be refined, passes through the desalter. As refineries try to maximize their margins, so-called opportunity crudes are often used. These crude oils generally contain increased levels of ...

  • Optimal monitoring of separation processes

    Monitoring interfaces or multiple layers in process vessels poses some challenges for the measurement technologies. Where other measuring methods fail and cannot withstand extreme process conditions, radiometric measuring systems can provide reliable results. Berthold’s radiometric measurement systems ...

  • Level control in coking units

    You want to improve the utilization of the drum capacity? Due to the conditions in the coke drum, a level measurement is a very challenging task. Where other measuring technologies tend to fail or end up being extremely unreliable, Berthold‘s radiometric level technology is ideal for monitoring the ...

  • Measurement solutions for the Refining Industry

    Berthold Technologies radiometric instruments for non-contacting level and density measurement are widely used in the global oil refining industry. Among our customers are well-known companies like Exxon Mobil, Sinopec, Shell, BP, Conoco Phillips, Lukoil and Total – just to name a few. Our measurement ...

  • InlineSENS - Density Measuring Cell

    Density and concentration measurement with low energy gamma radiation. The InlineSENS combines both a radiation source and scintillation detector in one device. Its use of low-energy gamma radiation from an Am-241 or Cm-244 source provides for strong responses to even the slightest change in product ...

  • LB 350 - Online Moisture Analyzer

    Radiometric moisture analyser for representative and robust measurements on bulk material. The LB 350 is a moisture measurement system for real-time determination of the moisture content of a wide variety of different bulk materials such as: * Coke * Sinter mixture * Ore * Sand * Building mater ...

  • FracSENS LB 6770 Density Meter

    The FracSENS LB 6770 nuclear density meter can connect directly to the control system. Without the transmitter unit, the outputted count rate can be used in the control system to calculate PPA, PPG, or SGU in both low and high pressure applications. The new scintillation technology ensures high sensitivity ...

SPONSORS