Interface and Multiphase Level Measurement
Radiometric measurements from Berthold. The radiometric measurement systems from Berthold are used to localize the interface layer between two phases. These systems are even used in more complex processes to measure the density profile and thereby picturing the heights of the different product layers inside the vessel. In this way the characteristic of the emulsion layer can be monitored as well.
The measurements are primarily applied in chemical plants and in the oil & gas industry e.g. on separator vessels. Whenever other measurement technologies fail to do their job due to temperature, pressure or geometrical issues, radiometric measurements can be counted on. Even caustic or acid fluids can be measured reliably with the Berthold systems. The measurement in extreme environments is the major benefit of the radiometric systems.
Measuring Principle
Gamma radiation is attenuated when transmitting a vessel. The attenuation by the heavy phase is much stronger due to its higher density. The light phase hardly attenuates and the gamma radiation arrives virtually without weakening at the detector side. Based on the measured intensity of the gamma radiation the height of the heavy phase and finally the location of the interface can be determined very precisely. The measurement is not affected by pressure, temperature, viscosity, colour and chemical properties of the measured material. Consequently this results in the high reliability and low maintenance of the radiometric measurement systems, even under harsh operating and environmental conditions.
View More
-
Density, concentration and solids content
Non-contacting measurement technology made by Berthold. Berthold density measurement systems are used for the continuous process control on pipelines and in vessels. Density, concentration and solids content are determined in a non-contacting manner, without affecting the flow properties of the measured ...
-
Continuous level - Non-contacting measurement
Non-contacting measurement technology by Berthold. The level measurement technology by Berthold is used in a variety of industrial sectors – ranging from the chemical to the waste water industry. It is suitable for measuring ranges of just a few millimetres up to several metres. Applications are ...
-
Interface and Multiphase Level Measurement
Radiometric measurements from Berthold. The radiometric measurement systems from Berthold are used to localize the interface layer between two phases. These systems are even used in more complex processes to measure the density profile and thereby picturing the heights of the different product layers ...
-
Interface measurement in desalters
Interface measurements in desalters are often regarded as not being very critical, even though every drop of oil, to be refined, passes through the desalter. As refineries try to maximize their margins, so-called opportunity crudes are often used. These crude oils generally contain increased levels of ...
-
Optimal monitoring of separation processes
Monitoring interfaces or multiple layers in process vessels poses some challenges for the measurement technologies. Where other measuring methods fail and cannot withstand extreme process conditions, radiometric measuring systems can provide reliable results. Berthold’s radiometric measurement systems ...
-
You want to improve the utilization of the drum capacity? Due to the conditions in the coke drum, a level measurement is a very challenging task. Where other measuring technologies tend to fail or end up being extremely unreliable, Berthold‘s radiometric level technology is ideal for monitoring the ...
-
Measurement solutions for the Refining Industry
Berthold Technologies radiometric instruments for non-contacting level and density measurement are widely used in the global oil refining industry. Among our customers are well-known companies like Exxon Mobil, Sinopec, Shell, BP, Conoco Phillips, Lukoil and Total – just to name a few. Our measurement ...
-
InlineSENS - Density Measuring Cell
Density and concentration measurement with low energy gamma radiation. The InlineSENS combines both a radiation source and scintillation detector in one device. Its use of low-energy gamma radiation from an Am-241 or Cm-244 source provides for strong responses to even the slightest change in product ...
-
LB 350 - Online Moisture Analyzer
Radiometric moisture analyser for representative and robust measurements on bulk material. The LB 350 is a moisture measurement system for real-time determination of the moisture content of a wide variety of different bulk materials such as: * Coke * Sinter mixture * Ore * Sand * Building mater ...
-
FracSENS LB 6770 Density Meter
The FracSENS LB 6770 nuclear density meter can connect directly to the control system. Without the transmitter unit, the outputted count rate can be used in the control system to calculate PPA, PPG, or SGU in both low and high pressure applications. The new scintillation technology ensures high sensitivity ...
SPONSORS