-
Gases: identifying hazards and mitigating risks
Feb-2012
Although critical for the operation of refineries and petrochemical plants, industrial gases can be associated with a spectrum of possible hazards and ...
-
Refinery power failures: causes, costs and solutions
Aug-2013
Power outages typically lead to damaging costs for refiners. Strategies are needed to minimise them.
-
Installing a power recovery system on FCC or RFCC units
Jan-2010
Full examination of the design options and operating issues related to the installation of a PRS on a FCC or RFCC unit will increase energy efficiency ...
-
Feb-2007
Why there is no excuse for operating a dirty amine system. The benefits of reclaiming amine systems are trumpeted by many and doubted by others.
-
Refinery power failures: causes, costs and solutions: part 2
Oct-2013
Technologies are discussed to help refiners formulate strategies in managing risks and crisis due to emergency shutdowns, thereby minimising financial ...
-
Analysis method for determining bound and free alkanolamines in HSS contaminated solutions
Jul-1990
A conductometric titration method has been developed to determine the true available alkanolamine in solutions used for H2S and CO2 removal from refinery ...
-
Monitoring and controlling corrosion in steam generation
Oct-2010
At-temperature oxidation reduction potential (ORP) technology enables real-time measurement and control of corrosion potential in steam generation
-
How to read a regulator flow curve
Sep-2011
The best way to select a regulator for your application is to examine its flow curve, which is often provided by the manufacturer. “Flow curve” is ...
-
Hydrocarbon removal from amines demonstrated experience
Mar-2006
Bringing amine system contaminants down to low levels has reduced operational problems. Several large operating facilities are now using the latest technology ...
-
Risks of accumulated sulphur in sulphur recovery unit
Aug-1998
Follow-up data to an October 1997 article proves with refinery experience that caustic neutralisation does not improve system operations
-
New roles for FCCU: carbon capture unit and coke gasifier
Jan-2009
Environmental and energy security concerns may evoke new roles for the FCCU in addition to the production of liquid fuels and light olefins. Gasification ...
-
Gasification/IGCC to improve refinery operations
Apr-2008
Gasification and IGCC in refineries is discussed in light of increased attention to CO2 emissions and environmental performance.
-
Optimal tonnage industrial gas plants
Oct-2011
Detailed examination of industrial gas needs is required to develop the most cost-effective industrial gas plant configuration
-
Combating the threat of mercury
Mar-2012
Emerging legally binding action on mercury emissions highlights the importance of monitoring and quantifying emissions from gas operations
-
Emissions monitoring and detection in the hydrocarbon industry
Feb-2010
Requirements for reducing air pollution emissions have been evolving over the past couple of decades and today are an intricate mix of limits, targets ...
-
Online real-time optimisation helps identify energy gaps
Oct-2010
Real-time supervision of a refinery’s energy system enables optimisation of its fuel consumption and emissions levels
-
Securing fuel supply and reducing GHG emissions
Apr-2008
Six strategic options are available to refiners to satisfy future energy and environmental requirements in the light of surging oil prices and public concerns ...
-
Thwarting fluid-system leaks, saving energy, reducing leaks
Mar-2008
Fluid leakage costs industry millions of dollars every year. For example, a few small leaks in a facility using air at 100 pounds per square inch gauge ...
-
Greater environmental protection from monitoring lower levels of contaminents
Apr-2010
A burgeoning world population and the industrialisation necessary to meet its needs have led to massive technological advances in all facets of human ...
-
Why hydrocarbon-based energy will continue dominating the market
Apr-2022
A crucial factor in generating power and producing transportation fuels from renewable resources depends on efficient supply and distribution. For example, ...
-
Safety in turnaround power services
Jul-2022
Renting power systems during a turnaround or unexpected shutdown must take into account the health and safety of contractors and plant personnel working ...
-
Why hydrocarbon-based energy will continue dominating the market
Apr-2022
A crucial factor in generating power and producing transportation fuels from renewable resources depends on efficient supply and distribution. For example, ...
-
Safety in turnaround power services
Jul-2022
Renting power systems during a turnaround or unexpected shutdown must take into account the health and safety of contractors and plant personnel working ...
-
Gases: identifying hazards and mitigating risks
Feb-2012
Although critical for the operation of refineries and petrochemical plants, industrial gases can be associated with a spectrum of possible hazards and ...
-
Refinery power failures: causes, costs and solutions
Aug-2013
Power outages typically lead to damaging costs for refiners. Strategies are needed to minimise them.
-
Installing a power recovery system on FCC or RFCC units
Jan-2010
Full examination of the design options and operating issues related to the installation of a PRS on a FCC or RFCC unit will increase energy efficiency ...
-
How to read a regulator flow curve
Sep-2011
The best way to select a regulator for your application is to examine its flow curve, which is often provided by the manufacturer. “Flow curve” is ...
-
Combating the threat of mercury
Mar-2012
Emerging legally binding action on mercury emissions highlights the importance of monitoring and quantifying emissions from gas operations
-
Monitoring and controlling corrosion in steam generation
Oct-2010
At-temperature oxidation reduction potential (ORP) technology enables real-time measurement and control of corrosion potential in steam generation
-
Refinery power failures: causes, costs and solutions: part 2
Oct-2013
Technologies are discussed to help refiners formulate strategies in managing risks and crisis due to emergency shutdowns, thereby minimising financial ...
-
Feb-2007
Why there is no excuse for operating a dirty amine system. The benefits of reclaiming amine systems are trumpeted by many and doubted by others.
-
Optimal tonnage industrial gas plants
Oct-2011
Detailed examination of industrial gas needs is required to develop the most cost-effective industrial gas plant configuration
-
Analysis method for determining bound and free alkanolamines in HSS contaminated solutions
Jul-1990
A conductometric titration method has been developed to determine the true available alkanolamine in solutions used for H2S and CO2 removal from refinery ...
-
Securing fuel supply and reducing GHG emissions
Apr-2008
Six strategic options are available to refiners to satisfy future energy and environmental requirements in the light of surging oil prices and public concerns ...
-
New roles for FCCU: carbon capture unit and coke gasifier
Jan-2009
Environmental and energy security concerns may evoke new roles for the FCCU in addition to the production of liquid fuels and light olefins. Gasification ...
-
Emissions monitoring and detection in the hydrocarbon industry
Feb-2010
Requirements for reducing air pollution emissions have been evolving over the past couple of decades and today are an intricate mix of limits, targets ...
-
Risks of accumulated sulphur in sulphur recovery unit
Aug-1998
Follow-up data to an October 1997 article proves with refinery experience that caustic neutralisation does not improve system operations
-
Gasification/IGCC to improve refinery operations
Apr-2008
Gasification and IGCC in refineries is discussed in light of increased attention to CO2 emissions and environmental performance.
-
Hydrocarbon removal from amines demonstrated experience
Mar-2006
Bringing amine system contaminants down to low levels has reduced operational problems. Several large operating facilities are now using the latest technology ...
-
Greater environmental protection from monitoring lower levels of contaminents
Apr-2010
A burgeoning world population and the industrialisation necessary to meet its needs have led to massive technological advances in all facets of human ...
-
Online real-time optimisation helps identify energy gaps
Oct-2010
Real-time supervision of a refinery’s energy system enables optimisation of its fuel consumption and emissions levels
-
Thwarting fluid-system leaks, saving energy, reducing leaks
Mar-2008
Fluid leakage costs industry millions of dollars every year. For example, a few small leaks in a facility using air at 100 pounds per square inch gauge ...
-
Safety in turnaround power services
Jul-2022
Renting power systems during a turnaround or unexpected shutdown must take into account the health and safety of contractors and plant personnel working ...
-
Why hydrocarbon-based energy will continue dominating the market
Apr-2022
A crucial factor in generating power and producing transportation fuels from renewable resources depends on efficient supply and distribution. For example, ...
-
Refinery power failures: causes, costs and solutions: part 2
Oct-2013
Technologies are discussed to help refiners formulate strategies in managing risks and crisis due to emergency shutdowns, thereby minimising financial ...
-
Refinery power failures: causes, costs and solutions
Aug-2013
Power outages typically lead to damaging costs for refiners. Strategies are needed to minimise them.
-
Combating the threat of mercury
Mar-2012
Emerging legally binding action on mercury emissions highlights the importance of monitoring and quantifying emissions from gas operations
-
Gases: identifying hazards and mitigating risks
Feb-2012
Although critical for the operation of refineries and petrochemical plants, industrial gases can be associated with a spectrum of possible hazards and ...
-
Optimal tonnage industrial gas plants
Oct-2011
Detailed examination of industrial gas needs is required to develop the most cost-effective industrial gas plant configuration
-
How to read a regulator flow curve
Sep-2011
The best way to select a regulator for your application is to examine its flow curve, which is often provided by the manufacturer. “Flow curve” is ...
-
Monitoring and controlling corrosion in steam generation
Oct-2010
At-temperature oxidation reduction potential (ORP) technology enables real-time measurement and control of corrosion potential in steam generation
-
Online real-time optimisation helps identify energy gaps
Oct-2010
Real-time supervision of a refinery’s energy system enables optimisation of its fuel consumption and emissions levels
-
Greater environmental protection from monitoring lower levels of contaminents
Apr-2010
A burgeoning world population and the industrialisation necessary to meet its needs have led to massive technological advances in all facets of human ...
-
Emissions monitoring and detection in the hydrocarbon industry
Feb-2010
Requirements for reducing air pollution emissions have been evolving over the past couple of decades and today are an intricate mix of limits, targets ...
-
Installing a power recovery system on FCC or RFCC units
Jan-2010
Full examination of the design options and operating issues related to the installation of a PRS on a FCC or RFCC unit will increase energy efficiency ...
-
New roles for FCCU: carbon capture unit and coke gasifier
Jan-2009
Environmental and energy security concerns may evoke new roles for the FCCU in addition to the production of liquid fuels and light olefins. Gasification ...
-
Gasification/IGCC to improve refinery operations
Apr-2008
Gasification and IGCC in refineries is discussed in light of increased attention to CO2 emissions and environmental performance.
-
Securing fuel supply and reducing GHG emissions
Apr-2008
Six strategic options are available to refiners to satisfy future energy and environmental requirements in the light of surging oil prices and public concerns ...
-
Thwarting fluid-system leaks, saving energy, reducing leaks
Mar-2008
Fluid leakage costs industry millions of dollars every year. For example, a few small leaks in a facility using air at 100 pounds per square inch gauge ...
-
Feb-2007
Why there is no excuse for operating a dirty amine system. The benefits of reclaiming amine systems are trumpeted by many and doubted by others.
-
Hydrocarbon removal from amines demonstrated experience
Mar-2006
Bringing amine system contaminants down to low levels has reduced operational problems. Several large operating facilities are now using the latest technology ...
-
Risks of accumulated sulphur in sulphur recovery unit
Aug-1998
Follow-up data to an October 1997 article proves with refinery experience that caustic neutralisation does not improve system operations
-
Analysis method for determining bound and free alkanolamines in HSS contaminated solutions
Jul-1990
A conductometric titration method has been developed to determine the true available alkanolamine in solutions used for H2S and CO2 removal from refinery ...