-
Gasifying coke to produce hydrogen in refineries
Jul-2012
Coke gasification to produce hydrogen for hydroprocessing is more capital intensive than steam methane reforming, but not so vulnerable to natural gas ...
-
Apr-2011
Gasification technologies deliver steam, hydrogen and power from low-value refining residues and petcoke
-
Steam reformers for hydrogen and synthesis gas
Jan-2013
Modern steam methane reformer design is a complex process that needs to be carefully optimised in terms of capital and operating costs
-
Solvent deasphalting and gasification: a synergy
Oct-2000
An analysis of the different refinery bottoms processing schemes, identifying configurations that produce the lowest cost feedstock for the integrated ...
-
Elimination of refinery sour gases and trace components
Jul-2007
Case study concerning elimination of sour gases and trace components from gasification gases. The objective is to produce pure hydrogen for hydrotreating ...
-
New roles for FCCU: carbon capture unit and coke gasifier
Jan-2009
Environmental and energy security concerns may evoke new roles for the FCCU in addition to the production of liquid fuels and light olefins. Gasification ...
-
Gasification for hydrogen supply
Oct-2013
Integrating the gasification of liquid residues into a refinery balances the hydrogen demand of hydroprocessing units
-
Gasification/IGCC to improve refinery operations
Apr-2008
Gasification and IGCC in refineries is discussed in light of increased attention to CO2 emissions and environmental performance.
-
Flexible upgrading of heavy feedstocks
Feb-2019
Adding tailor-made options for upgrading heavy crudes to existing assets can adapt refineries to changes in market conditions and regulatory demands.
-
Optimal tonnage industrial gas plants
Oct-2011
Detailed examination of industrial gas needs is required to develop the most cost-effective industrial gas plant configuration
-
Gasification technologies for hydrogen manufacturing
Apr-2007
Gasification technology can follow on from upgrading and treating technologies to convert a wide range of heavy residues into syngas, which can be used ...
-
Securing fuel supply and reducing GHG emissions
Apr-2008
Six strategic options are available to refiners to satisfy future energy and environmental requirements in the light of surging oil prices and public concerns ...
-
Identifying very small equipment leaks
Jan-2008
Very small leaks in feed/effluent exchangers can be identified using chemical tracing. This online technique can detect leaks as low as 5.0 ppm, avoiding ...
-
Extending gasification runtime with antifoulant
Jul-2013
When fouling is observed in the syngas cooler, an antifoulant programme can provide a gasification unit with an extended runtime
-
Revamping an air separation unit
Nov-2019
Revamp of a high pressure column with structured packing, reducing operating costs and avoiding discharging finished products to atmosphere.
-
Jun-2020
Petcoke gasification. The chemistry of gasification fits somewhere between combustion and pyrolysis. Combustion is a high temperature reaction in an excess ...
-
Optimising nitrogen utilisation in refinery operations
Feb-2023
Technical aspects and insights on managing nitrogen by considering actual operational scenarios.
-
Nov-2024
As the demand for lower-carbon and more circular products intensifies, more and more refiners and chemical manufacturers are evaluating the potential benefits ...
-
Jun-2020
Petcoke gasification. The chemistry of gasification fits somewhere between combustion and pyrolysis. Combustion is a high temperature reaction in an excess ...
-
Gasifying coke to produce hydrogen in refineries
Jul-2012
Coke gasification to produce hydrogen for hydroprocessing is more capital intensive than steam methane reforming, but not so vulnerable to natural gas ...
-
Flexible upgrading of heavy feedstocks
Feb-2019
Adding tailor-made options for upgrading heavy crudes to existing assets can adapt refineries to changes in market conditions and regulatory demands.
-
Apr-2011
Gasification technologies deliver steam, hydrogen and power from low-value refining residues and petcoke
-
Optimising nitrogen utilisation in refinery operations
Feb-2023
Technical aspects and insights on managing nitrogen by considering actual operational scenarios.
-
Solvent deasphalting and gasification: a synergy
Oct-2000
An analysis of the different refinery bottoms processing schemes, identifying configurations that produce the lowest cost feedstock for the integrated ...
-
Elimination of refinery sour gases and trace components
Jul-2007
Case study concerning elimination of sour gases and trace components from gasification gases. The objective is to produce pure hydrogen for hydrotreating ...
-
Optimal tonnage industrial gas plants
Oct-2011
Detailed examination of industrial gas needs is required to develop the most cost-effective industrial gas plant configuration
-
Securing fuel supply and reducing GHG emissions
Apr-2008
Six strategic options are available to refiners to satisfy future energy and environmental requirements in the light of surging oil prices and public concerns ...
-
New roles for FCCU: carbon capture unit and coke gasifier
Jan-2009
Environmental and energy security concerns may evoke new roles for the FCCU in addition to the production of liquid fuels and light olefins. Gasification ...
-
Extending gasification runtime with antifoulant
Jul-2013
When fouling is observed in the syngas cooler, an antifoulant programme can provide a gasification unit with an extended runtime
-
Gasification for hydrogen supply
Oct-2013
Integrating the gasification of liquid residues into a refinery balances the hydrogen demand of hydroprocessing units
-
Gasification technologies for hydrogen manufacturing
Apr-2007
Gasification technology can follow on from upgrading and treating technologies to convert a wide range of heavy residues into syngas, which can be used ...
-
Gasification/IGCC to improve refinery operations
Apr-2008
Gasification and IGCC in refineries is discussed in light of increased attention to CO2 emissions and environmental performance.
-
Identifying very small equipment leaks
Jan-2008
Very small leaks in feed/effluent exchangers can be identified using chemical tracing. This online technique can detect leaks as low as 5.0 ppm, avoiding ...
-
Revamping an air separation unit
Nov-2019
Revamp of a high pressure column with structured packing, reducing operating costs and avoiding discharging finished products to atmosphere.
-
Steam reformers for hydrogen and synthesis gas
Jan-2013
Modern steam methane reformer design is a complex process that needs to be carefully optimised in terms of capital and operating costs
-
Nov-2024
As the demand for lower-carbon and more circular products intensifies, more and more refiners and chemical manufacturers are evaluating the potential benefits ...
-
Nov-2024
As the demand for lower-carbon and more circular products intensifies, more and more refiners and chemical manufacturers are evaluating the potential benefits ...
-
Optimising nitrogen utilisation in refinery operations
Feb-2023
Technical aspects and insights on managing nitrogen by considering actual operational scenarios.
-
Jun-2020
Petcoke gasification. The chemistry of gasification fits somewhere between combustion and pyrolysis. Combustion is a high temperature reaction in an excess ...
-
Revamping an air separation unit
Nov-2019
Revamp of a high pressure column with structured packing, reducing operating costs and avoiding discharging finished products to atmosphere.
-
Flexible upgrading of heavy feedstocks
Feb-2019
Adding tailor-made options for upgrading heavy crudes to existing assets can adapt refineries to changes in market conditions and regulatory demands.
-
Gasification for hydrogen supply
Oct-2013
Integrating the gasification of liquid residues into a refinery balances the hydrogen demand of hydroprocessing units
-
Extending gasification runtime with antifoulant
Jul-2013
When fouling is observed in the syngas cooler, an antifoulant programme can provide a gasification unit with an extended runtime
-
Steam reformers for hydrogen and synthesis gas
Jan-2013
Modern steam methane reformer design is a complex process that needs to be carefully optimised in terms of capital and operating costs
-
Gasifying coke to produce hydrogen in refineries
Jul-2012
Coke gasification to produce hydrogen for hydroprocessing is more capital intensive than steam methane reforming, but not so vulnerable to natural gas ...
-
Optimal tonnage industrial gas plants
Oct-2011
Detailed examination of industrial gas needs is required to develop the most cost-effective industrial gas plant configuration
-
Apr-2011
Gasification technologies deliver steam, hydrogen and power from low-value refining residues and petcoke
-
New roles for FCCU: carbon capture unit and coke gasifier
Jan-2009
Environmental and energy security concerns may evoke new roles for the FCCU in addition to the production of liquid fuels and light olefins. Gasification ...
-
Gasification/IGCC to improve refinery operations
Apr-2008
Gasification and IGCC in refineries is discussed in light of increased attention to CO2 emissions and environmental performance.
-
Securing fuel supply and reducing GHG emissions
Apr-2008
Six strategic options are available to refiners to satisfy future energy and environmental requirements in the light of surging oil prices and public concerns ...
-
Identifying very small equipment leaks
Jan-2008
Very small leaks in feed/effluent exchangers can be identified using chemical tracing. This online technique can detect leaks as low as 5.0 ppm, avoiding ...
-
Elimination of refinery sour gases and trace components
Jul-2007
Case study concerning elimination of sour gases and trace components from gasification gases. The objective is to produce pure hydrogen for hydrotreating ...
-
Gasification technologies for hydrogen manufacturing
Apr-2007
Gasification technology can follow on from upgrading and treating technologies to convert a wide range of heavy residues into syngas, which can be used ...
-
Solvent deasphalting and gasification: a synergy
Oct-2000
An analysis of the different refinery bottoms processing schemes, identifying configurations that produce the lowest cost feedstock for the integrated ...